Last updated at: June 19, 2013 12:58 pm

UXDE dot Net Wordpress Themes

Duratrax 835B RTR Buggy

 Duratrax 835B RTR Buggy

There are a lot of tough buggies, but only one that’s guaranteed tough — and that’s the new 1/8 scale Duratrax 835B. It’s loaded with Stress-Tech™ parts, and every one of them is protected by a 1-year replacement guarantee. If any Stress-Tech part fails during the first year, DuraTrax replaces it free.

Other reasons for the 835’s durability include grey-anodized aluminum parts and hardened steel parts in the drivetrain. Driving the 835B is a SuperTigre® G-27CX .27 engine, a power, a power plant known for dependability and power, it’s protected by a 3-year limited warranty. The G-27CX .27 demands matching control and Duratrax provides it with a 2.4GHz FTR (Futaba Transmitter-Ready) system. It’s several steps above the usual ready-to-run radio, because it includes digital, metal-geared steering servo, 5-cell receiver pack and a wall charger. And since it’s an FTR system, it’s compatible with all Futaba® 2.4GHz FHSS systems.

While it’s great for sport driving alone, the 835B’s power and radio system also make it a solid contender in venues all the way up to regional contests. Droop screws, hex head hardware and more offer track-tuning flexibility for the up-and-coming competitor all in one value-packed package.

  • Duratrax 2-channel FTR 2.4GHz radio system with digital steering servo, 5-cell, 1300mAh receiver pack and 110V wall charger
  • SuperTigre G-27CX .27 engine, with recoil starter, polished tuned pipe, glow plug and 3-year limited warranty.
  • Countersunk, hard-anodized 3.25mm aluminum chassis
  • Grey-anodized aluminum parts include threaded Big Bore shocks, drag link plate, front and rear shock towers and front hinge pin plate
  • Hardened steel driveshaft and gears
  • 3.5 mm shock shafts
  • 4 mm shock towers
  • 4.5 mm tie-rod turnbuckles
  • 5 mm camber turnbuckles
  • Droop screws front and rear
  • Installed front and rear sway bars
  • Hex head hardware throughout
  • Fuel tank with a race-inspired “ring-pull” lid
  • A high-downforce wing
  • Mounted racing tires with foam inserts and 17 mm hex hubs
  • Body in four sizzling trim schemes

Specifications:

  • Length: 19.9 in (505 mm)
  • Width: 11.9 in (302 mm)
  • Height: 7.5 in (190 mm)
  • Wheelbase: 12.8 in (325 mm)
  • Weight: 7.9 lb (3565 g)
Published on in Featured, Nitro News, Off Road News, Products
Leave a Comment: